Quilting Tips Using Longarm Quilting Services

Everyone is of course, familiar with the quilt. It is quite a favorite for bed sheets, cushion upholstery, blankets, even mats and tablecloth. It is the art of piecing together scraps of fabric to make a unique design. It is fairly easy to make and can be done by almost everyone who has the desire to.

It is done by hand when it first started. It usually takes a small group to finish a big project. Today, modern quilt projects are either done by hand, on a sewing machine, or on longarm quilting services system especially for rush orders. Beginners do not need to feel insecure when starting their first project. There are already cut quilt squares ready for use and patterns available for novices.

You will need three different layers sewn together like a sandwich. The lowest is a plain sheet of cloth known as the backing, in the middle is an insulating material called the batting. This middle layer can either be made up of any warming material such as cotton or polyester or even wool. The material you put in the middle determines the softness of your quilt, so chose this carefully. On top of these two layers is the design itself.

Of course, before you can even start on the design that you have in mind, you have to have all that you need to make it. Quilting tools include the little squares that you piece together, a big sheet of cloth for the back, and insulating sheet in the middle. You will also need a sewing machine and basic sewing materials.

To make the top design you have to piece together little squares to make a design. It is usually recommended that beginners should use ready made squares to save on time and effort. You will have to mix and match these little scraps to make a unique design. Start on sewing together rows of threes. Three rows make a bigger square.

Now you will have to iron the rows to flatten them. Stack all three layers of the design, insulator, and back. The back portion should lie upside down so that the right side of the plain fabric could be seen from the back. The design should also be the smallest fabric. The insulator must be slightly wider and longer, and the last should be the biggest.

To avoid scrunches in the middle, start from the center then work your way to the sides. You can follow the stitch line you have already made with putting all the squares together for a more neat look. The more stitches you make, the more the batting is held in place. After wards you get yourself a long strip of cloth called a binding. This goes around all the edges to give the project a finished look. You press the binding first with iron, then secure the binding in its place at the ends of each sides.

The completion of the project is marked when the binding is already stitched in place. You can now wash it to give it soft and somewhat worn feel when you will already use it. The time frame usually depends on its size, though it is a well established fact that experienced quilters take less time than novices in finishing a task.

Of course, not everyone will have the time to make their own quilts. One can employ services that make quilts for shorter periods with the use of a long arm system. These usually take less time and with no effort, too.